Availability: | |
---|---|
SITUATION
1. Minimise anatagonism to tank mixes with flowable herbicides
2. Improve performance under adverse environmental conditions
RATE
800g/100L of spray solution
CRITICAL COMMENTS
1. Half fill spray tank with clean water and start agitation.
2. Add TOLL Spray Grade Ammonium Sulphate Herbicide Adjuvant granules to spray tank.
3. With agitation still running add the required flowable herbicide to the tank and mix thoroughly.
4. Add the required amount of Glyphosate-based product and the remaining water; mix thoroughly.
5. Add the surfactant, if required, near the end of the filling process to minimise foaming.
6. Always maintain adequate agitation during application and use the tank mix promptly.
NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
GENERAL INSTRUCTIONS
TOLL Spray Grade Ammonium Sulphate Herbicide Adjuvant should be used with non-selective herbicides only, as with some selective herbicides use may result in loss of selectivity and therefore crop damage. Ammonium Sulphate may be corrosive to metal parts of the sprayer. Thoroughly flush tanks, pumps, and nozzles with water after use.
Specifications:
Composition Analysis of Ammonium Sulphate
Batch No. | 20220928 | Grade | Special Grade | ||
Inspection person | Dai Li | Producing date | 28th, Sept. 2022 | ||
Grade | Special grade | Results (% w/w) | |||
Appearance | white crystalline powder,without visible mechanical impurities. | White crystalline powder,without visible mechanical impurities. | |||
N content(dry base) | ≥ 21.0% w/w | 21.08% w/w | |||
Water (H2O) | ≤ 0.5% w/w | 0.16% | |||
Free acid(H2SO4)content | ≤ 0.08% w/w | 0.002% | |||
S content (Sulphate) | ≥ 23% w/w | 24% w/w | |||
Fe content | ≤ 0.007% w/w | 0.001% | |||
As content | ≤ 0.00005% w/w | 0.00002% | |||
Cadmium Cd | None | ||||
Chrome Cr | <150 ppm | 6 ppm | |||
Lead Pb | <150 ppm | 1 ppm | |||
Soluble Sodium | < 3% w/w | None | |||
Soluble Chlorine | 0.08% w/w | 0.01% w/w | |||
Water insolubles content | ≤ 0.01% w/w | 0.007% w/w | |||
PH |
| ||||
Density | 1.77 |
Transportation of Ammonium Sulphate
Ammonium Sulphate
Ammonium Sulphate
Ammonium Sulphate
Ammonium Sulphate
content is empty!